Back to Priority One Isoetec Repair

Quick Reference for Isoetec Analog 14, 26, 25 ley phones

Last Number Redial:
Lift handset, pick an idle line key, then press the "#" key.

Intercom:
Lift handset and dial the extension number or press desired "DSS/BLF" key (Extensions start at 31, 301, or 3001 depending on your sysytem)
For a private intercom call dial "1" first (This will force a ring on the phone you are calling)

Page:
Lift handset and dial page zone (60-69) Speak after hearing a tone. For all page zones dial "60"

Call Transfer:
With current call in progress, hit the "TRAN/CON" key and dial the extension number or use a "DSS/BLF" key. Anounce your call and hang up.

Conference Calls:
One internal, two external:
    1. Pick idle line.
    2. Dial the first phone number.
    3. Press the TRAN/CON key.
    4. Pick another line.
    5. Dial the second phone number.
    6. Press the TRAN/CON key again. (LED will flash)

Two internal, one external:
    1. Pick idle line.
    2. Dial the phone number.
    3. Press the TRAN/CON key
    4. Dial "1" then the extension number or DSS/BLF key
    5. Press the TRAN/CON key again. (LED will flash)

Do Not Disturb DND:
You must have a key programmed for DND
Press the key once for DND, again to cancel.

Station Speed Dial:

To Program:
With the handset down, press PROGRAM key
Dial the bin location. Systems 18,24,&36 (1-0) - Systems 66 & 96 (01-30)
Dial the number to be stored (Up to 16 digits)
Press the PROGRAM key again
(NOTE: If you have a dedicated Speed Dial button programmed use that instead of the bin number)

To Use:
Select an idle line.
Press PROGRAM then dial your bin number.
(OR) If you have a programmed speed dial key just pick a line and hit the button.